-23-
161'00"5⁄32
20
If there is no value yet saved to memo-
ry, 0’00” is shown at the bottom of the
display and “0” at the top.
The oldest value is located in position
1 in the memory, while the newest
value is in position 20 (when 20 mea-
suring values have been taken). If an
additional measurement beyond the
20th measurement is taken, the oldest
value in the memory is deleted.
Deleting the Memory
To delete the measurements stored in a given memory
position, simply press the Clear/ On/Off button 5 [ ]
while on the measurement you want to delete.
To delete all values in the memory, press the 4 button
and the On/Off button 5 [ ] at the same time, then
release the On/Off button 5 [ ].
Adding/Subtracting Values
Measured or calculated values can be added or sub-
tracted.
Adding Values
The following example describes the addition of areas:
Measure an area as described in section “Area Mea-
surement”, see page 19.
Press the plus button 3 [ ]. The calculated area and
the symbol “+” will be displayed.
Press the measure button 2 [ ] to start another area
measurement. Measure the area as described in sec-
tion “Area Measurement” see page 19. Once the sec-
ond measurement is complete, the result of the sec-
ond area measurement is displayed below. To show
the end result, press the measure button 2 [ ] once
more.
2610051599 03-18 GLM42.indd 23
3/23/18 9:52 AM
