Bosch GLI 18V-1900 C Professional, Оригинальное руководство пользователя

Страница: 10 / 125

10 | English
1 609 92A 2SA | (12.7.16) Bosch Power Tools
The cordless worklight is dustproof and splash-protected due
to its special battery pack cover.
Bluetooth
® enables the cordless worklight to be operated us-
ing the “Bosch Toolbox” application.
Product Features
The numbering of the product features refers to the illustra-
tion of the cordless worklight on the graphics page.
1 On/Off switch
2 Lock of the battery pack cover
3 Battery pack cover
4 Lamp head
5 Pedestal
6 Heat sink
7 Tripod mount 5/8"
8 Carrying handle
9 Screw for battery lid
10 Battery lid
11 Button cell (3 V lithium battery, CR 2032)
12 Battery pack*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Assembly
Battery Charging (Accessory)
Note: The battery supplied is partially charged. To ensure full
capacity of the battery, completely charge the battery in the
battery charger before using your power tool for the first time.
The lithium-ion battery can be charged at any time without re-
ducing its service life. Interrupting the charging procedure
does not damage the battery.
The lithium-ion battery is protected against deep discharging
by the “Electronic Cell Protection (ECP)”. When the battery is
empty, the cordless worklight is switched off by means of a
protective circuit.

Do not continue to press the On/Off switch after the
cordless worklight has been automatically switched
off.
The battery can be damaged.
To remove the battery 12 , press the battery unlocking button
2 and pull the battery toward the rear out of the cordless
worklight. Do not exert any force when doing this.
Observe the notes for disposal.
Operation
Initial Operation
Inserting the battery
Unlock the lock of the battery pack cover 2 and fold up the
battery pack cover 3 .
Insert the charged battery 12 into lamp head 4 until it can be
felt to engage and faces flush against the lamp head 4 .
Close the battery pack cover 3 and then the lock of the battery
pack cover 2 .

Make sure that the rubber lip is seated correctly when
closing the battery pack cover.
Otherwise protection
against dust and splash water will not be ensured.
Cordless Worklight GLI 18V-1900 C
Article number 3 601 D46 5..
Rated voltage V= 14,4 18
Lighting duration, approx. min/Ah 40 50
Permitted ambient
temperature
– during charging
– during operation* and
during storage
°C
°C
0...+45
–20...+50
Recommended batteries GBA 14,4
GBA 18 V ...
GBA 18 V ...W
Recommended chargers AL 18..
GAL 3680
GAL 18...W**
Degree of protection IP 64 (dustproof
and splash-
protected)***
A) The signal range may vary greatly depending on external conditions,
including the receiving device used. The
Bluetooth
® range may be signif-
icantly weaker inside closed rooms and through metallic barriers (e.g.
walls, shelving units, cases, etc.).
* limited performance at temperatures <0 °C
** only for wireless charging batteries
*** applies only when battery pack cover is closed and locked
The colour rendition of illuminated objects can be distorted.
Data transmission
Bluetooth
®
Bluetooth
® 4.1
(Low Energy)
Signal range maximum 15 m
A)
System Requirements
Mobile terminal device
(tablet, smartphone) Android 4.3 (and above)
iOS 9 (and above)
Cordless Worklight GLI 18V-1900 C
A) The signal range may vary greatly depending on external conditions,
including the receiving device used. The
Bluetooth
® range may be signif-
icantly weaker inside closed rooms and through metallic barriers (e.g.
walls, shelving units, cases, etc.).
* limited performance at temperatures <0 °C
** only for wireless charging batteries
*** applies only when battery pack cover is closed and locked
The colour rendition of illuminated objects can be distorted.
OBJ_DOKU-54076-001.fm Page 10 Tuesday, July 12, 2016 4:06 PM