24
| English
1 609 929 N80 | (6.2.08)
Bosch Power Tools
Technical Data
Declaration of Conformity
We declare under our sole responsibility that
the product described under “Technical Data” is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 98/37/EC (until Dec. 28, 2009),
2006/42/EC (from Dec. 29, 2009 on).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
08.01.2008, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Assembly
Battery Charging
A battery that is new or has not been used for a
longer period does not develop its full capacity
until after approx. 5 charging/discharging cy-
cles.
To remove the battery
19
, press the unlocking
buttons
18
and pull the battery out of the ma-
chine to the rear.
Do not exert any force.
The battery is equipped with a NTC temperature
control which allows charging only within a tem-
perature range of between 0 °C and 45 °C. A
long battery service life is achieved in this man-
ner.
A significantly reduced working period after
charging indicates that the battery is used and
must be replaced.
Observe the notes for disposal.
Circular Saw
GKS 18 V
Professional
GKS 24 V
Professional
Article number
3 601 F66 F..
3 601 H73 D..
Rated voltage
V=
18
24
No-load speed
rpm
3500
3500
Cutting depth, max.
– for 0° bevel angle
– for 45° bevel angle
mm
mm
54
38
54
38
Base plate dimensions
mm
145 x 290
145 x 290
Saw blade diameter, max.
mm
160
160
Saw blade diameter, min.
mm
150
150
Blade thickness, max.
mm
1.8
1.8
Mounting bore
mm
20
20
Weight according to EPTA-Procedure 01/2003
kg
3.9
4.4
Please observe the article number on the type plate of your machine. The trade names of the individual machines may
vary.
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Head of Product
Certification
OBJ_BUCH-668-001.book Page 24 Wednesday, February 6, 2008 10:15 AM
