22
| English
1 609 92A 3W4 | (25.4.17)
Bosch Power Tools
English
Safety Notes
All instructions must be read and observed in order to enable
work with the GCC 30–4 Professional to be carried out safely.
Store these instructions in a safe place and provide them when
transferring the GCC 30–4 Professional or any object identified
using it to a third party.
It must be ensured that attaching the GCC 30–4 Professional does not limit
the proper and safe use of the object to be identified at any time.
Attaching a
GCC 30–4 Professional at the following locations is prohibited (for examples, see
image D):
– Protective devices,
– Ventilation grills,
– Components that are actively operated (e.g. on/off switches, controllers, in-
lets, etc.)
– Moving or rotating components,
– Type plates,
– Operating panels and grip surfaces,
– Softgrip surfaces,
– Surfaces in the direct vicinity of sparks,
– Surfaces that are exposed to strong mechanical or thermal effects,
– Surfaces that ensure that the object is positioned safely,
– Surfaces that could be damaged by adhesive components.
The following locations are suitable for attaching a GCC 30–4 Professional (for ex-
amples, see image E):
– Surfaces where attaching the GCC 30–4 Professional does not prevent or com-
plicate the operation of the object,
– Surfaces that will not be exposed in the event that the identified object falls
over,
– Surfaces with the minimum possible curvature.
Only use the two-part adhesive provided and observe all processing instruc-
tions from the manufacturer when attaching to the object.
The use of adhe-
sives with a different composition may either cause damage to the object to be
identified or fail to create a permanent bond between the GCC 30–4 Professional
and the object.
OBJ_BUCH-2515-003.book Page 22 Tuesday, April 25, 2017 8:11 AM
