the blade track before starting the
saw.
4.
Close the cover plate.
▶ Blades And Blade Selection
The blade dimensions required for this
saw is: .020" thickness, 1/2" wide and
28-3/4" in length. The .020" thickness
r e d u c e s b l a d e f a t i q u e a n d p r o v i d e
m a x i m u m t o o t h l i f e . T o m a x i m u m
cutting life, use a blade with correct
pitch (teeth per inch) for the specific
cutting job.
Blade are available in several pitches. To
select the proper blade, three factors
should be considered: The size, shape,
and type of material to be cut.
T h e f o l l o w i n g s u g g e s t i o n s a r e f o r
selecting the right blade for various
cutting operations. Keep in mind that
these are broad guide lines and that
blade requirement vary depending upon
specific size, shape and type of material
to be cut.
Generally, soft materials require coarse
pitch blade and hard materials require
f i n e p i t c h b l a d e s . U s e c o a r s e p i t c h
blades for thick wood and fine pitch
blades for thin work. It is important to
keep at least three teeth in the cut (see
“Typical Application”.)
-9-
Assembly
10 Teeth per inch
14 Teeth per inch
18 Teeth per inch
24 Teeth per inch
For tough stock 3/16"
u p
t o
3 - 1 / 4 "
i n
diameter or width.
For tough stock 5/32"
up to 3/4" in diameter
or width.
F o r t h i n - w a l l t u b i n g
a n d
t h i n
s h e e t s
heavier than 21 gauge.
F o r t h i n - w a l l t u b i n g
a n d
t h i n
s h e e t s
heavier than 21 gauge.
2610052966.qxp_GCB18-2 8/2/19 12:03 PM Page 9
