English |
19
Bosch Power Tools
3 609 929 B94 | (22.4.10)
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only
: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.
Functional Description
Read all safety warnings and all in-
structions.
Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The machine is intended for dry grinding, de-
burring and smoothing mainly mineral materials
(such as e.g., concrete, stone, marble and pave-
ment/plaster flooring). It is also suitable for re-
moving protective coating and adhesive residue.
The machine may be used exclusively in con-
junction with a vacuum cleaner of dust category
M.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1
Guard and extraction hood
2
Vacuum connection
3
Spindle lock button
4
Vacuum hose*
5
Service indicator
6
On/Off switch
7
Auxiliary handle
8
Brush collar
9
Handle (insulated gripping surface)
10
Grinder spindle
11
Mounting flange with O-ring
12
Diamand cup wheel*
13
Clamping nut
14
Quick-clamping nut
*
15
Two-pin spanner for clamping nut
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Technical Data
Noise/Vibration Information
Measured sound values determined according
to EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 88 dB(A);
Sound power level 99 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
Concrete Grinder
GBR 14 CA
Professional
Article number
0 601 773 7..
Rated power input
W
1400
Output power
W
820
Rated speed
min
-1
11000
Diamond cup wheel
diameter
mm
125
Thread of grinder
spindle
M 14
Restarting Protection
z
Reduced starting
current
z
Weight according
to EPTA-Procedure
01/2003
kg
2.7
Protection class
/
II
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
OBJ_BUCH-599-002.book Page 19 Thursday, April 22, 2010 3:59 PM
