English |
13
ditives (chromate, wood preservative). Materials containing
asbestos may only be worked by specialists.
– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the ma-
terials to be worked.
u
Avoid dust accumulation at the workplace.
Dust can
easily ignite.
Operation
Starting Operation
u
Pay attention to the mains voltage. The voltage of the
power source must match the voltage specified on the
rating plate of the power tool. Power tools marked
with 230 V can also be operated with 220 V.
u
Products that are only sold in AUS and NZ:
Use a resid-
ual current device (RCD) with a nominal residual current
of 30 mA or less.
Setting the Rotational Direction
The rotational direction switch
(2)
is used to change the ro-
tational direction of the power tool. However, this is not pos-
sible while the on/off switch
(3)
is being pressed.
Right rotation:
To drill and to drive in screws, press the ro-
tational direction switch
(2)
through to the left stop.
Left Rotation:
To loosen and unscrew screws and nuts,
press the rotational direction switch
(2)
through to the right
stop.
Switching on/off
To
start
the power tool, press and hold the on/off switch
(3)
.
Press the lock-on button
(4)
to
lock
the on/off switch
(3)
in
this position.
To
switch off
the power tool, release the on/off switch
(3)
;
or, if the switch is locked with the lock-on button
(4)
, briefly
press the on/off switch
(3)
and then release it.
Adjusting the Speed
You can adjust the speed of the power tool when it is on by
pressing in the on/off switch
(3)
to varying extents.
A light pressure on the on/off switch
(3)
results in a low rota-
tional speed. Increased pressure on the switch causes an in-
crease in speed.
Practical advice
u
Pull the plug out of the socket before carrying out any
work on the power tool.
u
Only apply the power tool to the screw/nut when the
tool is switched off.
Rotating tool inserts can slip off.
When drilling into metal, only use sharpened HSS drills (HSS
= high-speed steel) which are in perfect condition. The
Bosch
accessory range guarantees appropriate quality.
Using the drill bit sharpener (accessory), you can effortlessly
sharpen twist drill bits with a diameter of 2.5–10 mm.
The machine vice, which is available as an accessory, en-
ables the workpiece to be securely clamped. This prevents
the workpiece from turning and any accidents this could
cause.
Maintenance and Service
Maintenance and Cleaning
u
Pull the plug out of the socket before carrying out any
work on the power tool.
u
To ensure safe and efficient operation, always keep
the power tool and the ventilation slots clean.
In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by
Bosch
or by an
after-sales service centre that is authorised to repair
Bosch
power tools.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at:
www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: [email protected]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Bosch Power Tools
1 609 92A 5AG | (27.08.2019)
Содержание GBM 13 HRE
Страница 3: ... 3 A 1 2 5 7 5 6 3 4 5 6 1 A B Bosch Power Tools 1 609 92A 5AG 27 08 2019 ...
Страница 4: ...4 8 9 1 10 1 11 1 11 1 C D E F 1 609 92A 5AG 27 08 2019 Bosch Power Tools ...
Страница 158: ...158 2 607 990 050 S 41 1 613 001 003 1 612 025 020 1 608 571 062 1 609 92A 5AG 27 08 2019 Bosch Power Tools ...
