16
| English
1 609 929 K11 | (18.2.09)
Bosch Power Tools
Technical Data
Assembly
f
Before any work on the vacuum cleaner it-
self, pull the mains plug.
Mounting the Handle
The vacuum cleaner cart is designed in such a
manner, that the vacuum cleaner can be pushed
easier with the push handle
16
. Always grasp
the push handle
16
with both hands when push-
ing the vac.
Insert the push handle
16
into the 2 openings of
the container
11
. Push the clamps
15
through
the corresponding holes of the push handle
16
and then lock the clamps
15
.
The casters are equipped with brakes
12
. To ac-
tuate the castor brake
12
press the lever down-
wards.
Replacing/Inserting the Dust Bag
(see figure A)
– Unlock the latches
13
and remove the vacu-
um lid
3
.
– Pull off the full dust bag
17
from the connec-
tion flange toward the rear. Close the open-
ing of the dust bag by folding down the lid.
Remove the closed dust bag from the vacu-
um cleaner.
– Slide the new dust bag
17
over the connec-
tion flange of the vacuum cleaner. Make sure
that the full length of the dust bag
17
faces
against the inner wall of the container
11
.
Reattach the vacuum lid
3
.
– Lock the latches
13
.
For dry vacuuming operation, a dust bag
17
should be inserted. When operating with a dust
bag
17
, the folded filter
18
clogs slower, the vac-
uuming performance is kept up longer and the
disposal of dust becomes easier.
When materials not hazardous to one’s health or
materials with or without an exposition value of
≥
1 mg/m
3
according to dust category L (until
now application category U) are being vacu-
umed, it is possible to vacuum directly into the
container.
Wood vacuum cleaner
GAS 50 M
Professional
Article number
0 601 988 1..
Rated power input
W
1200
Container volume
(gross)
l
50
Net volume
l
43
Dust bag contents
l
21
Vacuum*
mbar
225
Airflow*
l/s
39
Suction capacity
W 316 (6 mbar)
Surface of folded filter
cm
2
8600
Dust category (BIA)
M
Weight according
to EPTA-Procedure
01/2003
kg
17.4
Protection class
/
I
BIA test certificate
number
200220710/
1110
* measured at the blower
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your vacuum cleaner. The trade names of the individual
vacuum cleaners may vary.
OBJ_BUCH-877-001.book Page 16 Wednesday, February 18, 2009 11:21 AM