Bosch GAS 12-25 PL, Оригинальное руководство пользователя

Страница: 18 / 257

18 | English
(15) Vacuum hose
(16) Extraction adapter
(17) Curved nozzle
(18) Crevice nozzle
(19) Plastic bag/dust bag
A)
(20)
Main filter
(21) Wet filter
(22) Pre-filter
(23) Rubber lip
(24) Brush inserts
(25) Floor nozzle
(26) Suction tube
(27) Snap fastener
(28) Filter holder
(29) Filter basket
(30) Intake port
(31) Clips for securing the plastic bag
(32) False air intake
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Wet/dry dust extractor GAS 12-25 PL
Article number 3 601 J7C 1..
Rated power input W 1250
Frequency Hz 50–60
Container volume (gross) l 25
Net volume (liquid) l 15
Dust bag volume l 20
Max. vacuum
A)
– Dust extractor kPa 19
– Turbine kPa 20
Max. flow rate
A)
– Dust extractor l/s 36
– Turbine l/s 65
Automatic start/stop kg ●
Weight according to EPTA-Pro-
cedure 01:2014 9
Protection class / I
Protection rating kg IPX4
A) Measured using a vacuum hose 3 m long and 35 mm in diameter
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Automatic start/stop
Rated
voltage Max. output Min. output
EU 220–240 V 2100 W 100 W
UK 240 V 2100 W 100 W
CH 230 V 2100 W 100 W
Permitted connected load of the connected power tool.
These values can differ for other country-specific models. Please take
note of the information on the socket of the dust extractor.
Noise/vibration information
Noise emission values determined according to EN
60335-2-69 .
Typically the A-weighted sound pressure level of the dust ex-
tractor is
76 dB(A). Uncertainty K = 3 dB. The noise level
when working can exceed 80 dB(A).
Wear hearing protection
Total vibration values a
h
(triax vector sum) and uncertainty K
determined according to EN 60335-2-69 : a
h
< 2.5 m/s
2
,
K = 1.5 m/s
2
.
Fitting
u
Pull the plug out of the socket before cleaning or per-
forming maintenance on the vacuum cleaner, making
tool adjustments, changing accessories or putting
away the vacuum cleaner.
This safety measure prevents
the vacuum cleaner from being started accidentally.
Fitting the vacuuming accessories (see figure A)
The vacuum hose (15) is equipped with a clip system which
can be used to connect vacuuming accessories (dust extrac-
tion adapter
(16) , curved nozzle (17) ).
Fitting the nozzles and tubes
– Push the curved nozzle (17) onto the vacuum hose (15)
until you hear both snap fasteners (27) on the vacuum
hose engage.
– Then attach the required extraction accessory (floor
nozzle, crevice nozzle, suction tube, etc.) firmly to the
curved nozzle
(17) .
– To remove the accessory, press the snap fasteners (27)
inwards and pull apart the components.
Fitting the dust extraction adapter
– Push the dust extraction adapter (16) onto the vacuum
hose (15) until you hear both snap fasteners (27) on the
vacuum hose engage.
– To remove the adapter, press the snap fasteners (27) in-
wards and pull apart the components.
Fitting the vacuum hose
Vacuuming function (see figure B1)
– Push the vacuum hose (15) into the hose connection
piece (3) and turn it as far as possible in the direction of
rotation .
1 609 92A 4CP | (09.11.2018) Bosch Power Tools