5
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
Electrical safety
Batteries can explode or leak, cause injury or fire. To re-
duce this risk, always follow all instructions and warn-
ings on the battery label and package.
DO NOT short any battery terminals.
DO NOT charge alkaline batteries.
DO NOT mix old and new batteries. Replace all of them
at the same time with new batteries of the same brand
and type.
DO NOT mix battery chemistries.
Dispose of or recycle batteries per local code.
DO NOT dispose of batteries in fire.
Keep batteries out of reach of children.
Remove batteries if the device will not be used for sev-
eral months.
Maintenance
DO NOT use this digital anglefinder for any purpose oth-
er than those outlined in this manual. This could result
in serious injury.
ALWAYS use only the accessories that are recommend-
ed by the manufacturer of your digital anglefinder. Use
of accessories that have been designed for use with other
digital anglefinders could result in serious injury.
Repair and servicing must always be performed by a
qualified repair facility. Repairs performed by unquali-
fied personnel could result in serious injury.
General Safety Rules
Safety Rules for Anglefinders
When using the angle information provided by this tool
to cut materials, always observe all of your saw’s instruc-
tions, including those for positioning and clamping the
workpiece. In some cases, it may not be possible to set
the required angles on a particular saw or type of saw,
and an alternative means of performing the cut will need
to be used.
For extremely acute (sharp) angles, it may be necessary
to make the cut using a taper jig with a table saw or cir-
cular saw.
Read all safety warnings and all in-
structions. Failure to follow the warn-
ings and instructions may result in electric shock, fire
and/or serious injury.
