22
en | Installation
FLEXIDOME IP panoramic 6000/7000 - outdoor
2019-07 | V01 | DOC
Installation manual
Bosch Security Systems B.V.
8.
Put the mounting plate in position and attach it with the four screws. The screws must be
5 to 6 mm in diameter (0.20 to 0.24 in.) and equal or bigger than 32 mm (1¼ in.) in
length. Tighten the screws between 4 and 7 Nm (3 and 5.2 lbfft). If the device is mounted
on a wall, make sure that the arrow on the mounting plate points up.
9.
Remove the screw from the camera base to remove the side cover.
10. Put the PoE cable through the hole on the camera base.
11. Attach the grommet to the PoE cable.
