en
Environmental protection and saving energy
6
3 Environmental protection and saving energy
3.1 Disposing of packaging
The packaging materials are environmentally compat-
ible and can be recycled.
▶
Sort the individual components by type and dispose
of them separately.
3.2 Saving energy
If you follow these instructions, your appliance will use
less power.
Hide the clock in standby mode.
¡
The appliance saves energy in standby mode.
Note:
The appliance requires:
¡
A maximum of 1 W when the appliance is in opera-
tion with the display switched on
¡
A maximum of 0.5 W when the appliance is in oper-
ation with the display switched off
4 Installation and connection
4.1 Safety clearances
Comply with the safety clearances for the appliance.
4.2 Installing and connecting the appliance
WARNING ‒ Risk of electric shock!
Incorrect installation is dangerous.
▶
Connect and operate the appliance only in accord-
ance with the specifications on the rating plate.
▶
Connect the appliance to a power supply with al-
ternating current only via a properly installed socket
with earthing.
▶
The protective conductor system of the domestic
electrical installation must be properly installed.
▶
Never equip the appliance with an external switch-
ing device, e.g. a timer or remote control.
▶
When installing the appliance, check that the power
cable is not trapped or damaged.
If the insulation of the power cord is damaged, this is
dangerous.
▶
Never let the power cord come into contact with hot
appliance parts or heat sources.
▶
Never let the power cord come into contact with
sharp points or edges.
▶
Never kink, crush or modify the power cord.
1.
Place the appliance on a level, solid surface with
sufficient load-bearing capacity.
2.
Ensure that the ventilation slots are clear.
→
3.
Using the mains plug, connect the appliance to an
earthed socket that has been correctly installed.
