6 720 643 259 (2010/05)
Menu settings INSTALLER SETTINGS (for installers only)
|
39
US/CA
Menu: Heating parameters > Minimum outdoor
temperature
B
Set the minimum outdoor temperature for the
entire heating system (reference values
Æ
table 3).
A low outdoor temperature produces a flat
heating curve.
Menu: Heating parameters > Building storage
capacity
B
Set the factor for the heat storage capacity of
the building.
–
≥
50%
: Building of solid construction
(e.g. very well insulated building).
–
≤
50%
: Building of lighter construction
(e.g. wood frame construction).
Menu: Heating parameters > Calibrate internal
room temp sensor
Use this menu if you would like to correct the
displayed room temperature.
B
Position a precision instrument near the
FB 100. The precision instrument must not
transfer any heat to the FB 100.
B
Keep away from heat sources such as sunlight,
body heat, etc. for 1 hour.
B
Adjust the displayed room temperature
correction value.
Menu: Heating parameters > Heating circuit
solar optimization
For a detailed description of
Heating circuit solar
optimization
Æ
see page 40.
For further information, see the documentation
of the outdoor reset control.
City
Minimum
outdoor
temperature
in °F ( °C) City
Minimum
outdoor
temperature
in °F ( °C)
Bermuda
59 (15)
Montreal
– 9 ( – 23)
Boston
0 ( – 18)
New Orleans
19 ( – 7)
Cleveland
– 4 ( – 20) New York
0 ( – 18)
Chicago
– 9 ( – 23) Ottawa
– 9 ( – 23)
Dallas
10 ( – 12)
Pittsburgh
– 4 ( – 20)
Detroit
– 9 ( – 23) Quebec
– 15 ( – 26)
Honolulu
59 (15)
San
Francisco
36 (2)
Houston
19 ( – 7)
Toronto
– 9 ( – 23)
Los Angeles
36 (2)
Washington
0 ( – 18)
Miami
36 (2)
Tab. 3
Minimum outdoor temperatures for
North America
Additional settings for the solar
system must be made on the
outdoor reset control.
