- 3 -
INITIAL PREPARATIONS
•
Determine the operating voltage at the installation
site. The camera‘s Voltage Regulator Board
accepts both 12VDC and 24VAC input without
change to internal connections.
See
Section 2, Input Power Connections
.
•
Determine the optimum location for the camera.
See
Section 3, Mounting-Camera Housing.
•
The factory default is set for ceiling mount. For
unique designation wall mount, see section 4.
•
All cameras have been tested prior to shipment.
The factory default is set for ceiling mount. After
the wiring has been reconnected, it is advisable to
check the camera’s operation before installation.
GUIDELINES
Four requirements must be met before the
EX7/8
can
be installed. The sections listed below will aid the
installer in setting up the camera for these requirements.
Section 2.
Power Input Wiring Connections
Section 3.
Mounting-Camera Housing
Section 4.
Camera Lens – Settings and Adjustments
Section 5.
Camera Re-Assembly
