Bosch EX40N, Руководство по установке

Страница: 18 / 37

12
Step 3.3 - For side wiring entry, feed the
power and video cables through a
½ NPT nipple (not supplied) or an
electrical conduit and connect them
as per
Figure 3-1 on page 13.
Tighten the nipple into the side of
the base. Seal the wiring conduit
with silicone to prevent moisture
penetration.
Step 3.4 - For bottom wiring entry, feed the
wires through the hole in the base
and connect them as per
Figure 3-2
on page 14. Close the side hole with
the supplied ½ NPT plug.
Step 3.5 - Mount the camera base. A mounting
hole template has been provided on
page 26 for this procedure.
Step 3.6 - Seal all holes in the neoprene pad
and around the ½ NPT plug with
silicone to prevent moisture
penetration.