Bosch EasyHammer 12V, Оригинальное руководство пользователя

Страница: 14 / 93

14 | English
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Hexagonal/SDS quick tool holder
(2) Dust protection cap
(3) Locking sleeve
(4) Mode selector switch
(5) On/off switch
(6) Handle (insulated gripping surface)
(7) Battery charge indicator
(8) USB Type-C® port
a)
(9) Flap for USB Type-C® port
a)
(10) Worklight
(11) USB cable
(12) Drill bit with SDS quick shank
b)
(13) Drill bit with hexagonal shank with groove
b)
(14) Screwdriver bit with hexagonal shank with
groove
b)
(15) Universal bit holder with hexagonal shank with
groove
b)
(16) Screwdriver bit with hexagonal shank
b)
(17) Power supply
b)
(country-specific)
a) USB Type-C® and USB-C® are trademarks of USB Implementers
Forum.
b) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless rotary hammer EasyHammer 12V
Article number 3 603 JD0 0..
Rated voltage V= 12
Rated speed min
-1
0−850
Max. torque
– Soft screwdriving ap-
plication
Nm 5.5
– Hard screwdriving ap-
plication
Nm 17
Impact energy per stroke
according to EPTA-Proced-
ure 05:2016 J 0.5
Impact rate min
-1
4300
Tool holder 1/4" hexagonal
SDS quick
Max. drilling diameter
– Concrete and masonry mm 10
– Metal mm 6
– Wood mm 10
Max. screw diameter mm 6
Cordless rotary hammer EasyHammer 12V
Weight according to EPTA-
Procedure 01:2014 kg 1.1
Permitted ambient temper-
ature
– During charging °C +10 to +35
– During operation
A)
and
during storage
°C –10 to +50
Recommended power supply
– 27 W USB-C 1 600 A01 R..
A) Limited performance at temperatures <0 °C
Additional technical data can be found at:
http://www.bosch-do-it.com/ecodesign
Noise/Vibration Information
Noise emission values determined according to
EN 60745-2-6 .
Typically, the A-weighted noise level of the power tool is:
Sound pressure level
82 dB(A); sound power level
93 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745-2-6 :
Hammer drilling into concrete: a
h
= 23 m/s
2
, K = 3,0 m/s
2
,
Drilling into metal: a
h
= 2,5 m/s
2
, K = 1,5 m/s
2
,
Screwdriving: a
h
< 2,5 m/s
2
, K = 1,5 m/s
2
,
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
Battery Charging (see figure A)
u
Use only the power adaptors listed in the technical
data.
Only these power adaptors are matched to the lith-
ium-ion battery of your power tool.
1 609 92A 4MK | (28.01.2021) Bosch Power Tools