DX4010V2
|
Installation Instructions | 8.0
RJ-16 Data Bus Connector (P3)
Bosch Security Systems, Inc. | 9/08 | F01U083036-01
11
8.0 RJ-16
Data
Bus
Connector (P3)
Figure 9: P3 Connector
SER
Rx
Tx
BUS
Rx Tx
LED
P2
P3
1
DB9 GND
ENABLE
P1
1- RJ-16 data bus connector (P3)
For remote programming connection, use one of
the two cables supplied: RJ-16 to molex for control
panels with the data bus provided on a header
(such as the D6412, DS7240, or the GV2 control
panels). If no data bus header is present, use the
RJ-16 to spade lugs for terminal strip connections.
9.0 USB Data Bus Connector
Uses a standard USB type A
→
B cable. One cable
is provided with the DX4010V2.
If the computer does not recognize the USB port,
add the drivers located on the supplied disk.
9.1 Installing USB Drivers
Install the drivers.
1.
Double-click
CP210x_VCP_Win2K_XP_S2K3.exe.
Figure 10: Select File
2.
Click
Run.
Figure 11:
Security Warning
3.
Click
Next
to continue.
Figure 12: Install Shield
2
4.
Click
I accept the terms of the license
agreement
. Then click
Next
.
Figure 13: Security Warning
