14
Operation
Note:
Switch on the extractor hood when you start cooking and
switch it off again several minutes after you have finished
cooking. This is the most effective way of removing the kitchen
fumes.
Control panel
Setting the fan
Note:
Always adjust the fan strength to meet current conditions.
If there is a large build-up of steam or fumes, select a high fan
setting.
Switching on
1.
Press the
#
button.
The fan starts in fan setting 2.
2.
Press button 1, 3 or the
C
or
D
button to set
another fan level.
Switching off the appliance
Press the
#
button.
Intensive setting
You can use the intensive setting if there is a large build-up of
odours and fumes/vapours.
Switching on
1.
Press the
C
button.
Intensive mode 1 is activated.
2.
Press the
D
button.
Intensive mode 2 is activated.
Note:
The run time of the intensive mode is
approx. six minutes. Once this time has elapsed, the appliance
switches back to a lower fan setting.
Switching off
Press button 1, 2 or 3.
The intensive mode ends.
Automatic mode
Switching on
1.
Press the
#
button.
The fan starts in fan setting 2.
2.
Press the
>
button.
The optimum fan setting 1, 2 or 3 is set automatically using a
sensor.
Switching off
Press button 1, 2, 3 or the
#
button.
Automatic mode is switched off.
The fan switches off automatically if the air quality in the room
falls below a certain level. Automatic mode can run for a
maximum of four hours.
Sensor control
In automatic mode, a sensor in the extractor hood detects the
intensity of the cooking and roasting odours. Depending on the
sensor setting, the fan automatically switches to another fan
setting.
Default sensitivity setting:
„
(fan setting 3)
Lowest sensitivity setting:
‚
(fan setting 1)
Highest sensitivity setting:
†
(fan setting
D
)
Changing the sensitivity of the sensor
If the sensor control reacts too quickly or too slowly, change
the sensitivity setting.
1.
When the fan is switched off, press and hold the
>
button for
approx. four seconds.
The setting is displayed.
2.
Press button 1, 2, 3 or the
C
or
D
button to
change the sensitivity setting.
3.
Press and hold the
>
button for approx. four seconds.
The change is saved.
ERRVW
SRZHU
ERRVW
Explanation
#
Switches the fan on/off
>
Switches on automatic mode
1
Switches on fan setting 1
2
Switches on fan setting 2
3
Switches on fan setting 3
C
Switches on intensive mode 1
D
Switches on intensive mode 2
+
Switches on the fan run-on
E
Resets the metal grease filter saturation indicator
F
Resets the activated charcoal filter saturation indica-
tor
B
Switches on the lighting
