25
Replacing the light bulbs
Bulbs:
1.
Switch off the extractor hood and pull
out the mains plug or switch off the
electricity supply at the fuse box.
2.
Remove the grease filters (see Filters and
Maintenance).
3.
Detach the bulb cover.
4.
Replace the bulb (commercially available
halogen bulb 230 volt, 28 watt, E 14
bulb holder).
5.
Attach the lamp cover again.
6.
Re-insert the grease filters.
7.
Plug the appliance into the mains or
switch it on at the fuse box.
Halogen bulbs:
1.
Switch off the extractor hood and pull
out the mains plug or switch off the
electricity supply at the fuse box.
When switched on, the halogen bulbs
become very hot. Even for some time after
the bulbs have been switched off there is
still a risk of burns.
2.
Remove the bulb ring with a screwdriver
or similar tool.
3.
Replace the halogen light bulb
(conventional halogen bulb, 12 Volt,
max. 20 Watt, G4 cap).
Caution:
Refer for plug-in lampholder.
Take hold of the bulb with a clean cloth.
4.
Re-insert the bulb ring.
5.
Plug the appliance into the mains or
switch it on at the fuse box.
Note: I
f the light does not function, check
that the bulbs have been inserted correctly.
