background image

6

Cleaning the metal mesh grease filters

Risk of fire!

Grease deposits in the grease filter may catch fire.

Clean the grease filter at least every 2 months. 

Never operate the appliance without the grease filter.

Notes

Do not use any aggressive, acidic or alkaline cleaning 

agents.

When cleaning the metal mesh grease filters, also clean the 

holder for the metal mesh grease filters in the appliance 

using a damp cloth.

The metal mesh grease filters can be cleaned in the 

dishwasher or by hand.

In the dishwasher:
Note: 

If the metal mesh grease filters are cleaned in the 

dishwasher, slight discolouration may occur. This has no effect 

on the function of the metal mesh grease filters.

Do not clean heavily soiled metal mesh grease filters together 

with utensils.

Place the metal mesh grease filters loosely in the dishwasher. 

The metal mesh grease filters must not be wedged in.

By hand:
Note: 

You can use a special grease solvent for stubborn dirt. It 

can be ordered via the Online Shop.

Soak the metal mesh grease filters in a hot soapy solution. 

Clean the filters with a brush and then rinse them thoroughly.

Leave the metal mesh grease filters to drain.

Removing metal grease filter

1.

Open the lock and fold down the metal mesh grease filter.
While doing this, place the other hand under the metal mesh 

grease filter.

2.

Take the metal mesh grease filter out of the holder.

Notes

Grease can accumulate in the bottom of the metal mesh 

grease filter.

Hold the metal mesh grease filter level, otherwise grease 

will drip out.

3.

Clean the metal mesh grease filter.

Installing the metal mesh grease filter

1.

Insert the metal mesh grease filter.
While doing this, place the other hand under the metal mesh 

grease filter.

2.

Fold the metal mesh grease filter upwards, locking it in place.

Содержание DWA064W50B

















Отзывы: