Product
Document type
Release #
SAP/Doc number
DVR 600 Series
Release notes
V2.0.6
Security Systems
Release date
2012.10.12
Page 4 of 6
3.4
Version 2.0.1
File name: 600series.bin (2012-03-23)
This release includes the following improvement:
•
Web browser support for DVR 600 Series on IE9
•
Option to avoid ICMP ping with Control Center (requires CC release v3.35)
o
Important note
:
In the new firmware you can set the ICMP to On or Off in the local UI
menu ‘Network-TCP/IP’
ICMP must set to
On
to get the DVR connected to a CC version 3.34 or
older because in this version of Control Center the ICMP is required
In the new Control Center version 3.35 the ICMP is not required
anymore, therefore in this CC version you can set ICMP to
Off
in the
local UI menu ‘Network-TCP/IP’
•
Email notification with a 10 seconds video clip (10 pictures, iFrame only)
•
Low bandwidth support by selecting 256/512kbps bandwidth throttle (iFrame only mode
when selecting bandwidth of 256 or 512kbps in local UI)
•
PAL or NTSC video format detection is improved (user will be clearly notified when
video format of DVR don’t match with video format of connected cameras).
•
Improve PTZ handling in full screen (you can select Menu, Search, Export or Exit when
PTZ control is active)
•
Video playback from HDD mounted in other DVR600 (possible to move complete HDD
set from one to another DVR600)
•
Avoid invalid log-on when user ID is used special characters like /:@ (In this firmware
these characters are grayed out and cannot be selected)
•
Give warning/possible to cancel before delete video after video format (NTSC/PAL)
change
This release includes the following bug fixes were below issues are solved:
•
It is possible to use AUX on/off function in Control Center version 3.35
•
Correct AM/PM setting using export via web when DVR is set in 24h mode
•
Dome never stop moving if using PTZ control and drag mouse point
•
Recording channel led off if used HDD is not certified
File name: 600series.bin (2012-04-20)
3.5
Version 2.0.2
File name: 600series.bin (2012-04-20)
This release includes the following bug fixes:
•
Export via web access is not possible when logged-on as 'Advanced User' or 'Normal
user’ that has rights for export. Always an error is stating that the export file contains
0MB. This has been solved.
