Bosch DKE9305AUC, Инструкции по эксплуатации и монтажу

Страница: 11 / 32

11
0 8. Insert the other 4 screws with washers.
Before the 4 screws are tightened
down, align the hood properly.
0 9. Connect up the air outlet pipe.
10. Connect the hood to the electricity
supply.
11. Stainless steel model:
❑
Remove the protective film from the
two flue ducts.
Avoid damage to the sensitive
surface.
Installation
12. Screw the upper flue duct to the sides
of the fixing bracket with 2 short
screws.
13. Position the lower flue duct on the
hood and screw the hood to the flue
duct from below with 2 long screws.
To prevent scratching the upper
duct when pushing on the lower duct,
cover the edge of the lower duct with
the installation template or other
protective material.
Then screw the flue duct to the sides of
the fixing bracket with 2 short screws.
Before tightening the 2 screws,
align the flue duct.
14. Re-insert the grease filter
(see operating instructions).
1.
2.