Bosch DIP-2040EZ-00N, Руководство по установке

Страница: 20 / 40

Obtainging a basic configuration
DIVAR IP 2000 offers an easy-to-use configuration wizard to
obtain quickly a basic configuration of a smaller system.
To achieve a basic configuration using the Configuration Wizard:
1.
Open a web browser from any PC in the network, enter the
IP address of DIVAR IP in the address bar, then press
ENTER. The Welcome page of the Configuration Wizard is
displayed.
Note:
If you do not know the IP address, proceed as follows:
–
Only one DIVAR IP 2000 is in the network:
Enter
http://mydivar
or
https://mydivar
, then
press ENTER. The Welcome page of the Configuration
Wizard is displayed.
!! Use
mydivar
only if there is one DIVAR IP in the
same network, not if there are multiple DIVAR IP.!!
– Multiple DIVAR IP 2000 are in the same network:
Use the IP Helper tool to display all devices with their
IP addresses. The tool is available in the online catalog
on the DIVAR IP 2000 product page.
2. On the Welcome page select your preferred language, then
click Start configuration.
3. Run-through the wizard and follow the instructions. Each
page provides you with information how to use it.
4. After finishing the Configuration Wizard your system has a
basic configuration available. If the basic configuration
needs to be extended, use the advanced configuration.
See also:
–
Using the IP Helper tool, page 29
– Advanced configuration, page 21
6
20 en | Obtainging a basic configuration DIVAR IP 2000
2014.07 | V1 | DOC Bosch Sicherheitssysteme GmbH