Bosch Dinion NWC-455-10P, Руководство по эксплуатации

Страница: 29 / 110

Dinion IP Quick set-up | en 29
Bosch Security Systems Operating Instructions V 2.5 | 2007.6
4. Turn the back focus adjustment as required.
5. Lock the back focus locking button.
6. Exit the menu.
4.4 Adjustment procedure Manual-iris Lens
1. Unlock the back focus locking button.
2. Adjust the lens to the maximum lens opening.
3. Turn the back focus adjustment as required.
4. Lock the back focus locking button.
4.5 Adjustment procedure Video-iris Lens
1. Unlock the back focus locking button.
2. Access the
Lens Wizard
menu.
3.
Set Back Focus Now
is highlighted in the menu.
4. Turn the back focus adjustment as required.
5. Lock the back focus locking button.
6. Select
Set LVL
in the menu; the
Level
bar appears.
7. Point the camera at the scene it will be mostly viewing.
8. Adjust the level potentiometer located on the lens until the
Level
bar is in the central position.
9. Exit the menu.
The best performance with video iris lenses is obtained when
the peak/average potentiometer of the lens matches the peak/
average balance configuration setting.
4.6 Install IP address submenu
To operate the camera in your network, a network-valid IP
address must be assigned. The factory default IP address is
192.168.0.1
Function Selection Description
IP Address Enter an IP address for the camera. Use LEFT/RIGHT
to change position in the address, use UP/DOWN to
select the digit. Use SELECT to exit the address edit
screen.