8
Removing metal grease filter
1.
Press the lock on the filter cover.
Note:
The filter cover is heavy. Grip the filter cover with two
hands.
2.
Open the filter cover downwards.
Note:
Open the filter cover slowly and without any jerky
movements.
3.
Press the lock on the metal grease filters.
Note:
To avoid causing damage, do not bend the metal
grease filter.
4.
Take the metal grease filter out of the holder.
Note:
Fat may accumulate in the bottom of the metal grease
filter. Hold the metal grease filter level to prevent fat from
dripping out.
5.
Clean the appliance from the inside.
6.
Clean the metal grease filter and let it dry before re-fitting.
Installing the metal mesh grease filter
1.
Insert metal grease filter.
While doing this, place your other hand under the metal
grease filter.
2.
Fold up metal grease filter and engage the lock.
3.
Close the filter cover upwards.
Note:
Ensure that the filter cover lock engages correctly.
Replacing the batteries in the remote control
1.
Undo screws.
2.
Remove cover.
3.
Remove the batteries.
4.
Correctly insert the new batteries (23AE 12 V).
5.
Dispose of flat or faulty batteries according to local
regulations.
Note:
Do not dispose of batteries in general household waste.
Содержание DID068R59
Страница 1: ... en Instruction manual Extractor hood DID068R59 ...
Страница 2: ......
Страница 10: ...10 Accessories for circulated air mode not included in the delivery DSZ5300 DSZ5201 ...
Страница 11: ...11 ...