Bosch DHU63.HQ, Инструкция по эксплуатации

Страница: 8 / 12

en
Trouble shooting
8
Fitting the metal grease filter
1.
Place the metal filter mat in the filter grille.
2.
Clamp the metal filter mat in place with the wires.
3.
Insert the filter grille.
Note:
Make sure that the locks on the left and right
of the filter grille engage.
Changing the activated charcoal filter (only
in circulating-air mode)
In order to guarantee efficient odour filtration, the filter
must be serviced regularly.
The activated charcoal filters must be replaced at least
every 4 months.
Notes
■
The activated charcoal filters are not included in the
delivery. The activated charcoal filters can be
obtained from specialist retailers, from our after-
sales service or from the Online Shop.
■
The activated charcoal filters cannot be cleaned or
reactivated.
Note:
Only use genuine replacement filters. This
ensures optimal performance of the appliance.
1.
Remove the fleece grease filter; see the section
entitled
Removing the metal grease filter
.
2.
Undo the threaded joints on the activated charcoal
filter covers.
3.
Remove the activated charcoal filter.
4.
Insert the new activated charcoal filter.
5.
Screw the covers into place.
6.
Install the metal grease filter; see the section entitled
Installing the metal grease filter
.
3
Trouble shooting
Trouble shooting
Malfunctions often have simple explanations. Please
read the following notes before calling the after-sales
service.
:
Warning – Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by
one of our trained after-sales technicians. If the
appliance is defective, unplug the appliance from the
mains or switch off the circuit breaker in the fuse box.
Contact the after-sales service.
Malfunction table
--------
Problem Possible cause Solution
The appliance
does not work
The plug is not
plugged in.
Connect the appliance to the
electricity supply
Power cut Check whether other kitchen
appliances are working
Faulty fuse Check in the fuse box to make
sure that the fuse for the appli-
ance is OK
The lighting does
not work.
The bulbs are
faulty.
For information on changing
the bulbs, see the "Replacing
Bulbs" section.