Bosch D720, Руководство пользователя

Страница: 13 / 34

12
Turn On the Perimeter With Delays
❒
I have this feature.
❒
I do not have this feature.
❒
This feature requires a passcode.
COMMAND 3 is used to arm only the perimeter of your building, leaving
the interior of the building disarmed. Once you have entered COMMAND
3, the exit delay time starts. You now have a predetermined amount of
time to leave before the perimeter arms. Enter your personal passcode
and press ENT, to cancel COMMAND 3.
Application
This arming command is useful in residential systems when you are
leaving, but members of your family, a baby-sitter, or a pet, are still inside
the house.
In commercial installations, use this command to rearm your system
when you are on the premises, but not yet open for business.
COMMAND 3
Arming with COMMAND 3:
1. Ensure that all perimeter points are secure. Interior points are not
armed with this command and may remain faulted while arming with
COMMAND 3. Perimeter point status lights should be off. If they’re not,
see the section describing Force Arming the System.
2. Press the COMMAND bar. The Command Mode indicator light comes
on.
3. Press the 3 key. The PERIMETER indicator light flashes. This
indicates that the system has begun exit delay time. When the delay
time expires, the light remains steady.
4. To disarm your security system or cancel COMMAND 3, enter your
personal passcode and press ENT before the delay time expires.