background image

4  |

  

Control Air M/M+ Water to Water Applications

                                                                                   

Installation & Operation Manual 

02.2019 | BTC 469503103 A

Data subject to change

1     Key to Symbols and Safety Instructions

1.1     Key to Symbols

Warnings 

          Warnings in this document are identifi ed by a warning 

triangle printed against a grey background.

Keywords at the start of a warning indicate the type and 
seriousness  of the ensuing risk if measures to prevent the 
risk are not taken.

The following keywords are defi ned and can be used in this document:

 

DANGER 

indicates a hazardous situation which, if not avoided, 

will result in death or serious injury.

 

WARNING

 indicates a hazardous situation which, if not 

avoided, could result in death or serious injury.

 

CAUTION

 

indicates a hazardous situation which, if not 

avoided, could result in minor to moderate injury.

 

NOTICE 

is used to address practices not related to personal 

injury.

Important information

 

   This symbol indicates important information where

there is no risk to people or property.

1.2     Safety Warnings

       

WARNING: ELECTRIC SHOCK HAZARD 

 

 

Installation and servicing of this equipment can be 
hazardous due to the electrical components. Only 
trained and qualified personnel should install, repair, 
or service the equipment.

       

WARNING: ELECTRIC SHOCK HAZARD

 

Before performing service or maintenance 
operations on the system, turn off main power to the 
unit. Electrical shock could cause personal injury or 
death. 

       

WARNING: FIRE, INJURY HAZARD  

 

 

When working on equipment, always observe 
precautions described in the literature, tags, 
and labels attached to the unit. Follow all safety 
codes. Wear safety glasses and work gloves. Use 
a quenching cloth for brazing, and place a fire 
extinguisher close to the work area.

       

WARNING: ELECTRIC SHOCK HAZARD

 

To Reduce the risk of Fire or Electric Shock, Do 
not interconnect the outputs of different class 2 
circuits.

       

WARNING: 

 

This product can expose you to chemicals including 
Lead and Lead components, which are known to 
the State of California to cause cancer and birth 
defects or other reproductive harm. For more 
information go to 

www.P65Warnings.ca.gov

.

Содержание Control Air M





























Отзывы: