Conettix D6680
| Installation Instructions | Contents
Contents
1.0
Introduction.......................................................4
Table 1: D6680 Default IP Address ............................... 6
1.1
Network Interface...............................................4 Table 2: Netmask Address ............................................ 10
1.2
Serial Interface ....................................................4 Table 3: Specifications ................................................... 15
2.0
Installation .........................................................5
2.1
All Installations ...................................................5
2.2
UL Installations Fire Alarm Applications........5
2.3
Mounting in a Separate Enclosure ...................5
2.4
D8004 Transformer Enclosure..........................6
3.0
Configuration and Programming .................6
3.1
Factory Default IP Address ...............................6
3.2
Identifying the MAC Hardware Address ........7
3.3
Obtaining an IP Address ...................................7
3.4
Initial Assignment of the IP Address using
ARP ......................................................................7
3.4.1 ARP Command Usage.......................................8
3.5
Using Telnet to Finish the Configuration ........8
3.5.1 Using Telnet with Windows 98SE or ME .......8
3.5.2 Using Telnet with Windows NT,
Windows 2000, or Windows XP.....................12
3.6
Programming Overview for the D6600 .........12
3.7
Configuring for Network Communication
Using a D6680 ..................................................13
3.8
Editing Program Parameters ...........................14
4.0
Specifications ..................................................15
Figures
Figure 1:
Network Interface........................................4
Figure 2:
RJ-45 Ethernet Jack Pinouts .......................4
Figure 3:
Serial Interface .............................................4
Figure 4:
25-pin Serial Port.........................................4
Figure 5:
Mounting Holes for D6680 ........................5
Figure 6:
D6680 in an AE1/AE2 Enclosure .............5
Figure 7:
D8004 Installation .......................................6
Figure 8:
D6680 Label.................................................7
Figure 9:
Command Syntax........................................7
Figure 10: MS-DOS Prompt .........................................8
Figure 11: Telnet Session ............................................10
Figure 12: Telnet session – Gateway Address ..........10
Figure 13: D6680 Encryption .....................................11
Figure 14: Command Prompt - telnet .......................12
Figure 15: Port Value Change....................................12
Tables
Bosch Security Systems, Inc. | 5/07 | 4998138732-01
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
3