Imp
ort
Ap
plia
nce
s.c
om
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Operating the appliance
en
15
Set the water hardness range.
Setting the water hardness range
So that the appliance can reliably remind you to
descale it when required, you must set your water
hardness range correctly.
The water hardness range is set to 4 (very hard) ex
works.
Caution!
The appliance may become damaged due to the use of
unsuitable liquids.
Do not use distilled water, highly chlorinated tap water
(>40 mg/l) or other liquids.
Only use fresh, cold, non-carbonated tap water or
softened water.
Notes
■
If your water is very hard, we recommend that you
use softened water.
■
If you only use softened water, you can set the water
hardness range to "softened" in this case.
■
If you use mineral water, set the water hardness
range to "4 very hard".
■
If you use mineral water, you must only use non-
carbonated mineral water.
You can change the water hardness in the basic
settings.
~
"Basic settings" on page 28
Cleaning the cooking compartment and
accessories
Before using the appliance to prepare food for the first
time, you must clean the cooking compartment and
accessories.
Cleaning the cooking compartment
To eliminate the new-appliance smell, heat up the
cooking compartment when it is empty and with the
oven door closed. An hour at grill level 3 is ideal for this
purpose. Make sure that there are no remnants of
packaging in the cooking compartment.
1.
Use the function selector to set Full-surface grill
(
.
2.
Set to grill level 3 using the rotary selector.
3.
Touch start
l
stop.
The appliance begins to heat up.
Switch off the appliance after one hour. To do so, touch
start
l
stop and then turn the function selector to the off
position.
Cleaning the accessories
Before you use the accessories for the first time, clean
them thoroughly with hot soapy water and a soft dish
cloth.
1
Operating the appliance
Operating the appliance
You have already learnt about the controls and how
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Switching the appliance on and off
Before you are able to set the appliance, you must
switch it on.
Note:
The childproof lock can only be set if the
appliance is switched off. Some displays also remain
visible in the display when the appliance has been
switched off.
Switch off your appliance when it is not being used. If
no settings are applied for a long time, the appliance
switches itself off automatically.
Switching on the appliance
Turn the function selector to switch on the appliance.
A standard value is highlighted in the display. The
appliance is ready to use.
You can find out how to select the operating modes in
the individual chapters.
Switching off the appliance
Turn the function selector to the off position.
Any functions that may be running are cancelled.
The time appears in the display.
Note:
You can set whether the clock should be
displayed when the device is switched off in the basic
settings.
Water hardness range
Setting
0
0 softened
1 (up to 1.3 mmol/l)
1 soft
2 (1.3 - 2.5 mmol/l)
2 medium
3 (2.5 - 3.8 mmol/l)
3 hard
4 (above 3.8 mmol/l)
4 very hard