Installation instructions
en
17
5.
Place the lid into the opening and move it to the left.
6.
WARNING ‒ Risk of tipping!
After removing the transportation lock, the drawer
may open and the appliance may tip over.
▶
Keep the drawer closed.
▶
Weigh down the appliance with a weight.
▶
Only open the drawer if the tilt protection is in-
stalled.
Remove the transport lock screws.
7.
Insert the power cord at the rear of the appliance.
Preparing the units
▶
Install the tilt protection. Ensure that the screws are
mounted in the upper part of the elongated holes.
Note:
The height of the tilt protection can be adjusted
to make it easier to slide the appliance into the kitchen
unit.
Installing the appliance
WARNING ‒ Risk of electric shock!
If the insulation of the power cord is damaged, this is
dangerous.
▶
Never let the power cord come into contact with hot
appliance parts or heat sources.
▶
Never let the power cord come into contact with
sharp points or edges.
▶
Never kink, crush or modify the power cord.
WARNING ‒ Risk of injury!
After removing the transport lock, the drawer may open
suddenly during transport.
▶
Transport the appliance in such a way that the
drawer does not accidentally open.
1.
Insert the power cable into a protective contact
socket.
2.
WARNING ‒ Risk of injury!
The high weight of the appliance may result in injury
when lifted.
▶
Do not lift the appliance on your own.
Slide the appliance into the unit.
3.
Centre the appliance.
Содержание BVE9101B1
Страница 19: ......
