Bosch BSG7....GB, Инструкция по эксплуатации

Страница: 22 / 36

22
Replacing the exhaust filter
You must replace the exhaust filter in your vacuum cleaner once a year.
Replacing the HEPA filter
If your vacuum cleaner is equipped with a HEPA filter, this should be replaced
once a year.
Open the dust bag compartment lid
Unlock the HEPA filter by pushing the locking tab in the direction of the
arrow and remove it from the vacuum cleaner.
CLICK!
Insert the new HEPA filter and click it into place.
After vacuuming up fine dust particles, shake out the motor
protection filter to clean it and replace the micro-hygiene filter,
activated carbon filter or HEPA filter if necessary.
*Only for model BSG72233GB
Changing the dust bag and filters
Replacing the micro active carbon filter
Open the dust bag compartment lid.
Release the filter holder by moving the locking lever in the direction of
the arrow.
Remove the micro active carbon filter.
Insert the new micro active carbon filter into the vacuum cleaner and
clip into place.
**Only for model BSG72225GB
*
*
**
**
9000 372 856 A 15.05.2008 16:42 Uhr Seite 22