Bosch BSG62185, Инструкция по эксплуатации

Страница: 47 / 138

45
* Depending on model
Figure
Remove the upholstery nozzle and crevice nozzle from
the accessories holder as illustrated.
11*
Figure
Push the handle into the suction pipe/telescopic tube.
To remove it, turn the handle slightly and pull it off the
tube.
Figure
Insert the suction pipe/telescopic tube into the adapter of
the floor tool.
To remove it, turn the tube slightly and pull it out of the
floor tool.
Figure
a)
Connect the suction pipes together, or
b) Unlock the telescopic tube to adjust its length by moving
the sliding switch in the direction of the arrow.
Figure
Holding the power cord by the plug, pull out the required
length and plug it into the mains socket.
Figure
Press the on/off button in the direction of the arrow to
switch your vacuum cleaner on/off.
Controlling the suction level
Figure
Adjust the suction by turning the on/off button in the
direction of the arrow.
The suction level can be infinitely adjusted to the level
required by turning the control knob in the direction of
the arrow.
Low power range =>
For vacuuming delicate materials, e.g. delicate
upholstery, curtains, etc.
Medium power range
=>
For daily vacuuming of lightly soiled floors.
High power range
=>
For vacuuming durable floor coverings, hard floors
and surfaces with heavy deposits of dirt.
9
8
7
6*
5*
4*
Vacuuming
Figure
Adjusting the floor tool:
䡲
Rugs and carpets =>
䡲
hard floors =>
Caution!
Floor tools are subject to a certain amount of wear,
depending on the type of hard floors you have
(e.g. rough, rustic tiles). Therefore, you must check
the underside of the floor tool at regular intervals.
Worn undersides of floor tools may have sharp edges
that can damage sensitive hard floors, such as parquet
or linoleum. The manufacturer does not accept any
responsibility for damage caused by worn floor tools.
10
Figure Vacuuming with accessories
Attach the nozzles to the suction pipe or handle as
required:
a) Crevice nozzle for vacuuming crevices and corners, etc.
b) Upholstery nozzle for vacuuming upholstered furniture,
curtains, etc.
c) Furniture brush
For cleaning window frames, cabinets, mouldings, etc.
d) Hard-floor brush
For vacuuming hard floor coverings (tiles, parquet
flooring, etc.)
Figure
After use, push the crevice nozzle and upholstery nozzle
back into the accessories holder as indicated.
13
12*
Figure
You can use the parking aid on the side of the vacuum
cleaner if you wish to stop vacuuming for a short time.
Once you have switched off the vacuum cleaner, slide
the catch on the floor tool into the groove on the side of
the appliance.
Figure
The appliance can also be carried using one of the two
handles when vacuuming steps, for example.
When the work is done
Figure
Unplug the vacuum cleaner.
Tug the power cord briefly and let go. The cable then
rewinds automatically.
Figure
To store or transport the vacuum cleaner, use the storage
aid on the underside of the vacuum cleaner.
Stand the vacuum cleaner up on its end. Slide the catch
on the floor tool into the groove on the underside of the
appliance.
You have purchased a floor vacuum cleaner which can
vacuum up any type of dry dirt using the dust container or
dust bag.
We recommend that you use:
- the dust container, in particular for your hobbies, e.g. to
vacuum up wood shavings, etc.
- the dust bag principally for everyday household cleaning.
17
16
15
14
„
„
„
„
„
„
„
„
„
„
„
„
„
„