Bosch BSG 81266CH, Инструкция по эксплуатации

Страница: 24 / 68

24
Turbo brush for floor
Fit the turbo brush onto the suction pipe.
Vacuuming with the brush
! Please observe!
Only vacuum using the brush on full suction
power, i.e. max. performance of the vacuum
cleaner.
The turbo brush has the possibility to change the
rotation speed of the brush from a maximum »A«
to a complete stop »B«
Moving the slider a little from »A« to »B«permits an
optimum cleaning effect for the different floor
coverings (long or short pile carpets).
Closing completely the fan inlet (position »B«)it is
possible to use the device as a normal floor nozzle.
Vacuuming en
CLICK!
CLICK!
a
b
c
a)
Crevice nozzle
For vacuuming in crevices and corners.
For difficult-to-reach places, the combination
tool can be extended in two stages by pulling
out the crevice nozzle like a telescope.
Pull out the crevice nozzle in two stages until it
audibly clicks into place.
The crevice nozzle can be pushed back together
by releasing the telescopic locks (press in the
direction of the arrow).
b)
Upholstery nozzle
For cleaning upholstered furniture, curtains, etc.
c)
Hard furnishings brush
For window frames, cabinets, profiles, etc.
Fold up the upholstery nozzle in the direction of
the arrow.
The brush ring is extended by turning in the
direction of the arrow.
The brush ring must be turned back in and the
upholstery nozzle folded back up before the
combination tool is inserted into the accessory
holder.