Speichersystem
| Installationsanleitung
Bosch Power Tec GmbH
DO_IA_2013
_HYB_A_3GER_BB
o
17.01.2
014
78 | Installation
Deutsch
Deut
sch
6.8
Batteriekonverter
6.8.1
Montieren
▶
Vorgehensweise
1. Im Gehäuse: Batteriekonverter schräg nach oben
schieben und Batteriekonverter senkrecht
vorsichtig herunterlassen. Linke und rechte Lasche
am Batteriekonverter
(1)
in die Halterungen im
Gehäuse
(2)
schieben.
2. Batteriekonverter unten: 2 M6-
Zylinderkopfschrauben mit 5er-Inbusschlüssel
festschrauben (Anziehdrehmoment 2,7 Nm)
WARNUNG
Verletzungsgefahr durch hohes Gewicht
Beim Einbau und Ausbau sowie beim Transport der
Komponenten kann es aufgrund des hohen
Eigengewichts der Komponenten zu Verletzungen
kommen.
Komponenten mit 2 Personen montieren und
transportieren
Vor den Transport an den Aufstellungsort Gehäuse
demontieren
WARNUNG
Verletzungsgefahr durch scharfe Kanten
Die Komponenten verfügen über scharfe Kanten, die
bei unvorsichtiger Handhabung zu Verletzungen der
Hände führen können.
Schutzhandschuhe tragen
Komponenten mit 2 Personen montieren