![background image](http://html.mh-extra.com/html/bosch/bpt-s-5-hybrid/bpt-s-5-hybrid_installation-manual_44840237.webp)
Bosch Power Tec GmbH
Storage system |
Installation manual
En
g
lis
h
DO_IA_2013
_HYB_A_3ENG_AB
o
17.01.2014
English
Installation | 93
6.31:
Earthing cables (to the mounting plate
(1)
/to the
door channel
(2)
)
■
One earthing cable each is installed: between the
mounting plate (connection terminals) and the
housing, and between the door channel and the
housing.
6.15.2 Installing the side panels
▶
Procedure
1. Place the side panel next to the housing with the
inner side facing rearwards
2. Use the 8 mm spanner to connect the side panel
earthing cable to the housing with an M5 hex nut
(tightening torque 2.5 Nm + 0.2 Nm max.)
3. Before fitting the side panel: check whether the
rear wall, which is earthed in the factory, is
earthed with an earthing cable (see the figure
below)
(1)
(2)