en
2
BOHANDL40/BOHANDL50
Handle Installation Instructions
m
Warning
Do not lift appliance by door handle. This could result in
injury or damage to the unit.
Designed exclusively for use with Bosch branded
products.
Tools and Parts Included
Removing Handles
1. On the closed door, while holding the handle, insert
the short end of the Allen wrench into a setscrew
hole.
2. Loosen the setscrew counter-clockwise a quarter-
turn at a time. Repeat for each of the setscrews.
3. The bottom door handle setscrews can be
accessed beneath the handle. Repeat steps 1 and 2
for the bottom drawer.
Attaching Handles
Only attach the handles once the appliance has been
positioned in its installation location and has been
leveled (see the Installation Instructions that came with
the appliance).
1. On the closed door, place a handle onto the
shoulder bolts, as shown in image.
2. Firmly push the handle toward the door until the
handle base is flush against the door.
3. While holding the handle, insert the short end of the
Allen wrench into the setscrew. Using a clockwise
motion tighten the setscrew just until it begins to
contact the shoulder bolt. Do not fully tighten the
screw.
4. Repeat steps 2 and 3 to secure the lower setscrew.
5. Once both setscrews have been partially tightened,
fully tighten both setscrews.
6. Repeat steps 1 through 5 to install the other two
handles onto the adjacent door.
7. For the bottom door handles, with the bottom door
closed, place the handle onto the shoulder screws.
8. Repeat steps 2 and 3 to secure the setscrew to the
shoulder bolts, as shown in image.
9. Once both setscrews have been partially tightened
as instructed in the previous steps, fully tighten both
setscrews.
DESCRIPTION
QUANTITY
Instructions
1
Door handle
4 (BOHANDL40)
3 (BOHANDL50)
Allen wrench
1
Right Assembly
Wrong Assembly
