Bosch BMCT-SLZ Скачать руководство пользователя страница 3

shutters / Venetian blinds / sun blinds which 

are equipped with obstacle detection or for 

which at least a comparable level of protection 

with regard to crushing injuries is ensured 

by means of other design features. Always 

consult an expert for this assessment and 

for the installation of any structural safety 

measures which may be required.

▶   Do not open up the device. It does not contain 

any parts to be maintained by the user. If a 

fault occurs, have the device checked by a 

specialist.

▶   We accept no liability for material damage 

or personal injury which is caused by 

improper use or failure to observe the safety 

instructions. In these cases, any guarantee 

claim becomes void! We accept no liability for 

consequential damage.

▶   For safety and approval reasons (CE/UKCA), 

the device may not be modified and/or no 

changes may be made to the device without 

authorisation.

▶   In the light control unit function, the model is 

only suitable for controlling electric lighting.

▶   In the shutter control unit function, the module 

is only suitable for controlling shutters, sun 

blinds and Venetian blinds.

▶   Any use other than that which is described 

in the user manual is considered improper 

and leads to the exclusion of guarantee and 

liability.

▶   The device is not suitable for disconnection.

Содержание BMCT-SLZ



















Отзывы: