Start-up / tuning
Ensure that you have a Bosch Smart Home
controller and the Bosch Smart Home app and
have successfully configured both. Now start
the Bosch Smart Home app and select “Add new
device”. Follow the instructions in the app.
Once the module has been switched on via the
fuse, it is in tuning mode for 3 minutes. Tuning
mode can be started on an unlinked module
by pressing the system button (1) again or a
connected switch (S1/S2).
Resetting to factory settings
You can reset the device to its factory settings as
follows:
Press the system button (1) and hold it for
approx. 4 seconds until the status LED (2) flashes
orange quickly. Release the system button briefly
and press it again until the LED lights green.
The device then restarts. Please note that it can
take a few seconds until the module is ready for
operation again.
WARNING Risk of electric shock.
Follow the rules for live working. Only
press the system button with an isolated
tool in accordance with EN IEC 60900. Not
observing these instructions can result in
death or severe injuries. Work on the 230 V
network may only be carried out by an
electrician.
When resetting to factory settings, the
settings and information are only lost from
the device and not from the Bosch Smart
Home controller.