Bosch BGB6, Руководство пользователя

Страница: 35 / 368

Basic operation
en
35
Controlling the power
1.
Press or ⁠.
→ Fig.
11
a
The power level is increased or de-
creased.
2.
Turn the telescopic tube with air
flow regulator to the required posi-
tion.
→ Fig.
12
a
The power is controlled continu-
ously.
Starting turbo mode
For particularly stubborn dirt, you can
use turbo mode.
▶
Press ⁠.
a
Turbo mode starts.
Stopping turbo mode
▶
Press ⁠.
a The appliance switches to the
power level that was previously
set.
Setting the floor tool
▶
Use the switch to set the floor
nozzle to the required base.
→ Fig.
13
Parking the appliance
Tip:
When taking shorter breaks from
vacuuming, the floor nozzle can be
placed in the parking aid.
▶
Slide the hook on the floor nozzle
into the parking aid.
→ Fig.
14
Stopping and carrying the ap-
pliance
1.
Switch off the appliance.
→
"Switching off the appliance",
Page 34
2.
Stand the appliance upright on its
end.
3.
Slide the hook on the floor tool into
the parking aid.
→ Fig.
15
4.
To overcome obstacles, carry the
appliance by the handle.
Vacuuming with accessory
1.
Place the required nozzle onto the
telescopic tube or the handle.
2.
After use, take the nozzle that is
used from the telescopic tube or
remove from the handle.
Vacuuming with the Multi-
Use-Brush
1
Note:
Do not remove the Multi-Use-
Brush after use. The suction power is
not restricted by the fitted Multi-Use-
Brush.
ATTENTION!
Vacuuming without the bristle ring
pushed down can damage the sur-
face.
▶
Never vacuum with the bristle ring
pushed up.
1.
Push the Multi-Use-Brush onto the
handle or the tube and lock it in
place.
→ Fig.
16
2.
Press the two locking catches on
the bristle ring.
1
Depending on the appliance specifications