Bosch BGB6, Руководство пользователя

Страница: 34 / 368

en
Basic operation
34
5.
Place the accessory support
1
onto
the telescopic tube.
→ Fig.
6
6.
Place the crevice nozzle
1
from the
bottom onto the accessory support
1
.
→ Fig.
6
7.
Place the brush ring
1
onto the up-
holstery nozzle
1
.
→ Fig.
7
8.
Place the upholstery nozzle
1
with
the brush ring
1
from above onto
the accessory holder
1
.
→ Fig.
6
Inserting the batteries
▶
Insert the batteries into the Re-
mote-Power-Control handle.
→
"Changing the batteries",
Page 39
Basic operation
Basic operation
Basic operation
Setting the telescopic tube
1.
Unlock the telescopic tube.
2.
Set the required length of the tele-
scopic tube.
→ Fig.
8
Switching on the appliance
1.
Hold the mains plug and pull it out
to the required length.
2.
Insert the mains plug into the
socket.
3.
Press ⁠.
→ Fig.
9
a The status display pulses white.
a
The appliance is in standby mode.
Note:
Risk of damage to the appli-
ance caused by being in standby
mode for too long. If you want to stop
vacuuming for a longer period of
time, switch off the appliance.
Switching off the appliance
1.
Press .
a
The status display goes out and
quickly flashes white three times
after a short time.
a
The appliance switches off. Any
functions currently in progress are
cancelled.
2.
Unplug the mains plug.
3.
Briefly pull on the mains power
supply cord and then let go.
a
The power cord retracts automatic-
ally.
Starting vacuuming
Requirement:
The appliance is in
standby mode.
→
"Switching on the appliance",
Page 34
▶
Press ⁠.
→ Fig.
10
a
The status display lights up white.
a
The appliance starts at the highest
power level.
a
The appliance starts in the most
recently selected power level if va-
cuuming was stopped previously.
Stopping vacuuming
▶
Press ⁠.
a
The appliance stops and the status
display pulses white.
a The setting for the power level is
retained.
1
Depending on the appliance specifications