Installation and connection
en-us
11
You can adjust the angle of the drawer:
1.
Open the drawer as far as it will go and remove
the bin.
2.
Remove the center screw on both sides.
Note:
If you want to reset the drawer to the factory
settings, keep the screws.
3.
Loosen the upper and lower screw on both sides.
Note:
Do not remove the screws.
4.
Move the drawer on the lower screw to the left or
right into the required position and tighten the
screw.
5.
Retighten all the screws.
6.
To check the position, close the drawer and
correct if necessary.
Содержание B36CL NG Series
Страница 102: ... 8001147649 8001147649 9909 en us fr ca es mx ...