Bosch B25L TDS25PRO1, Руководство по эксплуатации

Страница: 15 / 130

15
Trouble shooting
Problem Possible causes Solution
The steam
generator does
not come on.
• There is a connection problem.
• The steam tank and/or main power
button is not switched on.
• Check the mains cable, the plug and
the socket.
• Press the buttons for main power (8)
and steam generator (4) «On/Start».
The iron does not
heat up.
• The main power button is not switched
on.
• The temperature control knob is set to
the «min» position.
• Press the main power button (8)
«On».
• Set the temperature control knob
(15) to the desired position.
The iron begins
to smoke when
switched on.
• During first use: Certain components on
the appliance have been lightly greased
at the factory and may produce a little
smoke when initially heated.
• During later use: the soleplate may be
soiled.
• This is completely normal and will
stop after a short while.
• Clean the soleplate according to the
cleaning instructions in this manual.
Water flows
through the holes
on the sole plate.
• The steam function is being used before
it has reached temperature.
• The water is condensing inside the pipes
because steam is being used for the
first time or has not been used for a long
time.
• Reduce the steam flow when ironing
at low temperatures (Variable steam
control (5)).
• Point the iron away from the ironing
area and press the steam release
button (17) until steam is produced.
Dirt comes out
through the sole
plate.
• There is a build-up of scale or minerals
in the steam tank.
• Chemical products or additives have
been used.
• Use tap water mixed 50% with
distilled or demineralised water.
• Clean the sole plate with a damp
cloth.
• Never add products to the boiler
water.
The iron does
not produce any
steam.
• The boiler is not switched on or the
water tank is empty.
• The water tank is not fitted onto the
steam tank correctly.
• The steam regulator is set to the
minimum position.
• Set the switch (4) to the «Start»
position and/or fill the water tank.
• Fit the water tank back onto the
steam tank correctly (you will hear a
click).
• Increase the steam flow by turning
the steam control (5).
The ironed
garment turns
dark and/or sticks
to the soleplate.
• The selected temperature is too high
and has damaged the garment.
• Select a suitable temperature for the
material being and clean the sole
plate with a damp cloth.
The soleplate turns
brown.
• This is a regular consequence of usage. • Clean the soleplate regularly with a
damp cloth.
The appliance
makes a pumping
sound.
• Water is being pumped into the steam
tank.
• The sound will not stop.
• This is normal.
• If the sound will not stop, do not use
the steam generator and contact an
authorised technical service centre.
en