• HD/720p
1280 x 720, 30 ips
Stream 2
4
• SD/480p (WVGA)
5
854 x 480, 30 ips
• SD/240p
(WQVGA)
5
432 x 240, 30 ips
4. Stream 1 must be set to 720p at 30 ips.
5. Images displayed in 16:9 aspect ratio.
Network
Protocols
RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS, FTP,
DHCP, IGMP V2/V3, ICMP, ARP, SMTP, SNTP,
SNMP, RTSP, 802.1x, iSCSI, DynDNS, UPnP
Advanced
Networking
IPv6, QoS
Ethernet
10-Base T/100 Base-TX, auto-sensing, half/
full duplex, RJ45
Audio
• Standard
G.711, 8 kHz sampling rate
L16, 16 kHz sampling rate
AAC
• Signal-to-
Noise Ratio
>50 dB
• Audio
Streaming
Full Duplex / Half Duplex
Fiber Optic Specifications
VG4-SFPSCKT
Description
Fiber Optic Ethernet Media Converter kit.
Requires a small form-factor pluggable (SFP)
module (sold separately).
Data Interface
Ethernet
Data Rate
10/100 Mbps
IEEE 802.3 Compliant
Full Duplex or Half Duplex Electrical Port
Full Duplex Optical Port
Compatible Receiver
CNFE2MC
Installation
Installed inside a VG4-A-PA0, VG4-A-PA1,
VG4-A-PA2, VG4‑A‑PSU1, or a VG4‑A‑PSU2
power supply box with supplied mounting
hardware
SFP Modules
Description
Interchangeable modules available for use
with MMF or SMF optical fiber.
Data Interface
Ethernet
Data Rate
10/100 Mbps
IEEE 802.3 Compliant
Mechanical
Dimensions (LxWxH)
• SFP-2 and SFP-3
55.5 x 13.5 x 8.5 mm (2.2 x 0.5 x 0.3 in.)
• SFP-25, SFP-26
63.8 x 13.5 x 8.5 mm (2.5 x 0.5 x 0.3 in.)
Weight (all SFP modules)
0.23 kg (.05 lb)
Type
Connect
or
Wavelength
(transmit/receive)
Max.
Distance
SFP-2
MMF
Duplex
LC
1310 nm /
1310 nm
2 km
(1.2 miles)
SFP-3
SMF
Duplex
LC
1310 nm /
1310 nm
20 km
(12.4 miles)
SFP-2
5
MMF
Single
SC
1310 nm /
1550 nm
2 km
(1.2 miles)
SFP-2
6
MMF
Single
SC
1550 nm /
1310 nm
2 km
(1.2 miles)
Fiber Compatibility
Optical Fiber
Compatibility,
MMF
50/125 µm MMF. For 50/125 µm fiber,
subtract 4 dB from the specified optical
budget value. Must meet or exceed fiber
standard ITU-T G.651.
Optical Fiber
Compatibility,
SMF
8–10/125 µm SMF. Must meet or exceed
fiber standard ITU-T G.652.
Optical Distance
Specifications
Specified transmission distances are limited
to the optical loss of the fiber and any
additional loss introduced by connectors,
splices, and patch panels. The modules are
designed to operate over the entire optical
loss budget range, so they do not require a
minimum loss in order to operate.
Mechanical
Pan Range
360° cont.
Tilt Angle
18° above horizon
Variable Speed
0.1°/s-120°/s
Pre-position Speed
Pan: 360°/s
Tilt: 100°/s
Preset Accuracy
± 0.1° typ.
Electrical
Input Voltage
21-30 VAC
50/60 Hz
Power Consumption,
typical
55 W / 60 VA
or
19 W / 35 VA
6
6. Without heater connected in power supply box for indoor applications.
5 | AUTODOME 800 Series HD PTZ Camera
