16
Clean the Exterior Door Panel
Colored Doors
use only a soft cloth that is lightly dampened with soapy water.
Stainless Steel Doors
use a soft cloth with a non-abrasive cleaner (preferably a liquid
spray) made for cleaning stainless steel. for the best results, apply
the stainless steel cleaner to the cloth, then wipe the surface.
Clean the Door Gasket and Door Seal
regularly clean the door gasket with a damp cloth to remove food
particles and other debris. also clean the door seal, located inside
the dishwasher at the bottom of the door.
Wash Cycle Information
NOTE:
To save energy, this dishwasher has a “Smart Control” that
automatically adjusts the cycle based on soil loads and incoming
water temperature. The “Smart Control” makes decisions that can
cause the cycle time and water usage to adjust intermittently. the
cycle times listed in the use and Care manual are based on normal
soil loads and 120°f incoming water and will vary based on your
actual conditions.
See the Cycles Chart to determine the cycles available for your specific
model.
NOTE
:
on select models, the Half load feature will reduce the water
consumption by approximately 30 percent in the power scrub plus,
regular, and auto Wash cycles. the eCo option may be selected for the
power scrub plus, auto, regular and Delicate cycles on select models.
this reduces energy consumption approximately 10% due to lower
main wash and final rinse temperatures, but extends cycle length 5-10
minutes to maintain drying performance and the water usage will be
unmodified in comparison to the normal program cycles.
THE NSF SYMBOL
a dishwasher or a dishwasher cycle that has the nsf symbol has been
certified by the NSF International to meet very strict requirements
of wash time and water temperature to ensure dishware and
kitchenware sanitization. these requirements are explained in the
document nsf/ansi 184, residential Dishwashers. More information
on NSF Certification is available at the NSF website, http://www.
nsfconsumer.org/home/appliances.asp.
Your dishwasher is NSF certified. The dishwasher cycles that are
NSF certified are shown in the following chart. When these cycles
are complete, the “Sanitized” indicator on your dishwasher control
panel will illuminate.
NOTE
:
if your household water supply is too hot, your dishwasher’s
heating time may be reduced and the “Sanitized” light or symbol may
not illuminate. Your Dishwasher installation Manual has information on
the recommended temperature for your household hot water supply.
6.8
25.6
Water
Consumption
in gallons
Water
Consumption
in liters
Wash temp ˚f
Rinse Temp ˚F
Cycle time
(in minutes)
Minimum
Minimum
Maximum
Maximum
power scrub
plus
130
6.8
25.6
160˚
156˚
122˚-131˚
149˚-156˚
122˚
156˚
113˚
122˚
incoming
incoming
20.5
8.7
5.4
2.3
95-119
80
3.0
3.0
3.0
3.0
30
9
1.0
1.0
4.0
4.0
regular
Wash
Delicate/
economy*
Quick
Wash
rinse &
Hold*
11.3
11.3
11.3
11.3
Cycle Data
*select Models - refer to Cycle Chart
auto
Wash*
24.6
13.6
6.5
3.6
105-125
130˚-150˚
156˚
Half load function
Water
Consumption (l)
Water
Consumption (gal)
Cycle time
(in minutes)
110
90-110
2.9
10.9
75
8.7-15.9
17.9
4.7
99-110
10.5-15.9
2.8- 4.2
2.3- 4.2
not available
