14
| English
F 016 L81 403 | (13.1.16)
Bosch Power Tools
Noise/Vibration Information
Sound emission values determined according to
EN 60335-2-77.
Typically the A-weighted noise levels of the product are:
Sound pressure level 79 dB(A); sound power level 93 dB(A).
Uncertainty K =1 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60335:
a
h
<2.5 m/s
2
, K =1.5 m/s
2
.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EC, 2000/14/EC including their amendments and
complies with the following standards: EN 60335-1,
EN 60335-2-77, EN 50581.
2000/14/EC: Guaranteed sound power level 94 dB(A). Con-
formity assessment procedure according to Annex VI.
Equipment category: 32
Notified body:
TÜV Rheinland Intercert Kft., Budapest, Hungary, Nr. 1008
Technical file (2006/42/EC, 2000/14/EC) at:
Bosch Lawn and Garden Ltd., PT-HG/ENS-PA2,
Stowmarket, Suffolk IP14 1EY, England
Robert Bosch Power Tools GmbH
70538 Stuttgart, GERMANY
Stuttgart, 01.01.2017
Mounting and Operation
Troubleshooting
Weight according to EPTA-
Procedure 01:2014
kg
6.6
Protection class
/
II
Serial number
see type plate on the
garden product
Lawnmower
ARM 32
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your garden prod-
uct. The trade names of the individual garden products may vary.
Henk Becker
Executive Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Action
Figure
Page
Delivery Scope
1
182
Handle Assembly
2
182
Snap together the Grassbox
3
182
Grassbox fitting/removing
3
182
Adjusting the Cutting Height
4
183
Connecting the Extension Lead
5
183
Starting
5
183
Stopping
5
183
Working Advice
5 – 6
183 – 184
Blade Maintenance
7
184
Selecting Accessories
7
184
STOP
Problem
Possible Cause
Corrective Action
Motor refuses to start
Power turned off
Turn power on
Mains socket faulty
Use another socket
Extension cable damaged
Inspect cable, replace if damaged
Fuse faulty/blown
Replace fuse
Possible clogging
Check underneath the garden product and
clear out as necessary (always wear protective
gloves)
Motor protector has activated
Allow motor to cool and increase height of cut
Mowing too low for the conditions
Increase height of cut
Machine functions
intermittently
Extension cable damaged
Inspect cable, replace if damaged
Internal wiring of machine damaged
Contact Service Agent
Motor protector has activated
Allow motor to cool and increase height of cut
OBJ_BUCH-2138-003.book Page 14 Wednesday, January 13, 2016 2:41 PM