Bosch Security Systems
User Manual
2012.11
960H Day/Night IR Bullet Camera
Installation | en
9
6
Installation
6.2 Monitor connection
6.3 Camera adjustment
CAUTION!
To prevent humidity problems, the camera must be installed in dry conditions.
The housing front should never be removed in wet or moist conditions. Doing
so could cause condensation on the inside of the camera window.
1.
2.
3.
4.
5.
6.
7.
Remove the housing front.
Connect service monitor. (optional)
Adjust zoom and focus.
Fasten the zoom and focus lever.
Adjust OSD settings. (refer to OSD section)
Disconnect service monitor cable. (optional)
Re-mount housing front. Include warning to (1) check rubber seal is in place. And (2) tighten
housing front firmly to ensure protection against water ingress.
DU
AL(DC12V/A
C24V)
R
egulat
ed P
ow
er Suppl
y
DU
AL
(DC12V/A
C24V)
Terminal block
Terminal block connector
Female
BNC connector
*Sold separately
Video In
TV Monitor
Screw
Terminal
"+","-" Indication
2.6x3.2
(0.1x0.12)
10.16
(0.4)
5.08(0.2)
15.4(0.6)
18.2(0.71)
Camera
mm
(in.)
Ground contact
Signal contact
Housing front fastened enough.
(No gap between housing front and housing body)
Protection against water ingress ensured.
Housing front not fastened enough.
(Gap between housing front and housing body)
Risk of water ingress.
V
X
Содержание AN traffic 4000 IR
Страница 1: ...AN bullet 4000 IR 960H Day Night IR Bullet Camera ...
Страница 30: ...博世安防系统 使用手册 2012 11 MEMO ...
Страница 31: ......
Страница 32: ...Bosch Security Systems www boschsecurity com c Bosch Security Systems 2013 ...