Bosch AdvancedTemp, Оригинальное руководство пользователя

Страница: 29 / 510

English | 29
Display Capacity
51 % to 75 %
26 % to 50 %
15 min to < 25 %
maximum 15 min
If the battery indicator (g) flashes with the empty battery symbol, the batteries must be
replaced.
Always replace all the batteries at the same time. Only use batteries from the same man-
ufacturer and which have the same capacity.
u
Take the batteries out of the measuring tool when you are not using it for a pro-
longed period of time.
The batteries can corrode and self-discharge during pro-
longed storage in the measuring tool.
Operation
Starting operation
u
Protect the measuring tool from moisture and direct sunlight.
u
Do not expose the measuring tool to any extreme temperatures or variations in
temperature.
For example, do not leave it in a car for extended periods of time. In
case of large variations in temperature, allow the measuring tool to adjust to the ambi-
ent temperature before putting it into operation. The precision of the measuring tool
may be compromised if exposed to extreme temperatures or variations in temperat-
ure.
u
Make sure that the measuring tool is correctly acclimatised. In case of large vari-
ations in temperature, acclimatisation can take up to 30 min, or up to 90 min in ex-
treme situations. This may be the case, for example, if you store the measuring tool in
a cool car and then perform a measurement in a warm building.
u
Avoid hard knocks to the measuring tool or dropping it. After severe external influ-
ences and in the event of abnormalities in the functionality, you should have the
measuring tool checked by an authorised
Bosch after-sales service agent.
u
Do not close or cover the humidity and temperature sensor (4), the reception
lens (3) or the laser outlet aperture (2).
Switching on/off
You can switch on the measuring tool by pressing the ON/OFF button/mode button
(12) or the measure button (1) . After a brief start sequence, the measuring tool is
Bosch Power Tools 1 609 92A 7M8 | (03.05.2022)