![background image](http://html.mh-extra.com/html/bosch/advanced-hedgecut-36/advanced-hedgecut-36_original-instructions-manual_50969018.webp)
18
| English
Pay attention that no objects such as wires are cut. The
blade or drive can be damaged.
Anti Blocking
If the blade stalls on a tough material, the load of the motor
increases. The intelligent micro-electronics senses this over-
load condition and repeatedly reverses the motor, in order
to prevent stalling and to cut the branch through.
This audible reversing cut action continues for up to 3 s.
After cutting through, the garden product continues in its
normal mode, or in case the overload condition continues
the blades automatically stop in the open position (e.g. in
case a piece of metal fence accidentally blocks the garden
product).
Troubleshooting
Hedgecutter
Problem
Possible Cause
Corrective Action
Hedgecutter does not
operate
Battery discharged
Recharge battery; also see “Battery Charging”
Battery not fully connected
Ensure both locking levels are engaged
Hedgecutter operates
intermittently
Internal wiring of garden tool defective
Contact Service Agent
On/Off switch defective
Contact Service Agent
Motor reverses repeatedly then stops after 3 s.
see “Working Advice” (Anti Blocking)
Motor runs but blades
remain stationary
Internal Error
Contact Service Agent
Cutting blade hot
Cutting blade blunt
Have blade sharpened
Cutting blade has dents
Have blade inspected/overhauled
Too much friction, due to lack of lubricant
Apply lubricant spray
Blade will not move
Battery discharged
Recharge battery; also see “Battery Charging”
Machine defective
Contact Service Agent
Excessive vibrations/
noise
Machine defective
Contact Service Agent
Cutting time per bat-
tery charge too low
Too much friction, due to lack of lubricant
Apply lubricant spray
Blade needs cleaning
Clean blade
Poor cutting technique
see “Working Advice” (figure
D
)
Battery not fully charged
Recharge battery; also see “Battery Charging”
The blades are running
slow or the anti block-
ing feature is not func-
tioning
Battery discharged
Recharge battery; also see “Battery Charging”
Battery stored outside of battery temperature
Allow battery to warm naturally to room temperat-
ure (within battery operating temperature 0–
35 °C)
Battery and charger
Problem
Possible Cause
Corrective Action
Flashing red battery
charge indicator
No charging procedure
possible
Battery not (properly) inserted
Properly insert battery in charger
Battery contacts contaminated
Clean the battery contacts (e. g. by inserting and
removing the battery several times) or replace
the battery
Battery defective
Replace the battery
Battery charge indicat-
ors do not light up
Mains plug of battery charger not plugged in
(properly)
Insert mains plug (fully) into the socket outlet
F 016 L94 044 | (17.12.2019)
Bosch Power Tools
Содержание Advanced HedgeCut 36
Страница 283: ... 283 CLICK CLICK AL36V 20 AL3640 CV A B 1 2 3 4 5 6 9 7 9 8 8 7 Bosch Power Tools F 016 L94 044 17 12 2019 ...
Страница 284: ...284 Ø 20 mm Ø 25 mm 10 cm 1 m C D F 016 L94 044 17 12 2019 Bosch Power Tools ...
Страница 285: ... 285 E F 5 6 5 Bosch Power Tools F 016 L94 044 17 12 2019 ...