manualshive.com logo in svg

Bosch ABS M4, Руководство пользователя, Страница: 28 / 54

Поделиться
Скачать
Bosch ABS M4 Скачать руководство пользователя страница 28

Export

To save the whole settings and error messages (vehicle data ABS, testing, ECU In‐
fo) simultaneously, fill in the given fields. Click with “Export” in the drop‐down
menu.
If there are problems, you can send log and export file to your dealer or OEM
customer service.

System

Please contact your dealer or the OEM customer service if errors occur that you
are not able to fix by yourself. In this case, please send a log and export file. Click
with the right mouse button in the window and click on “Open” in the drop‐
down menu to find the log file.

Vehicle Data

You can find a form to fill in your vehicle data on www.bosch‐motorsport.com.
This form should be provided to you by your dealer with the order of the kit, if
the kit shall be programmed by Bosch.
If you need to replace the ECU or modify the programmed vehicle data, you can
update the data in the software by yourself.

9.2.3

9 | Programming and Diagnosis Software

 

28 / 54

ABS M4 Manual

Bosch Motorsport

Содержание ABS M4























































Отзывы:

Нет отзывов